iAeris1 Indoor Air Quality IAQ Detector with 7″ LCD Touch Display

iAeris 1
IAQ Monitoring System
Indoor Air Quality Detector
(Model No.: iAeris 1X)

Made in Taiwan

Descriptions

The iAeris air quality detector is the real time monitor of multiple indoor air quality indicator. This air quality detector can provide the status of temperature, humidity, CO2, CO, particulate matter (PM10), PM2.5, total volatile Organic compound (TVOC ), formaldehyde (HCHO) and Ozone(O3) at the same time. The 7” touch TFT LCD panel can display the air quality directly and provide a simple and easy to use interface. The BLE4.0 and WiFi let the measured data can upload to the internet, the current and historical data can be accessed by web.

Applications

• Living room
• Lobby
• Hospital
• School
• Smart home
• Bedroom
• Office
• Station
• Department store
• Internet of Things

Sensors Specifications:

• Temperature
  • Range: -40℃~125℃
  • Resolution: 0.1℃
  • Operating Principle: CMOSems
  • Response time: 30sec
  • Warm up time: 50sec
• Relative Humidity
  • Range: 0~100%RH
  • Resolution: 0.1%
  • Operating Principle: CMOSems
  • Response time: 30sec
  • Warm up time: 50se c
• Carbon Dioxide (CO₂)
  • Range: 0 ~ 5,000ppm
  • Resolution: 1 ppm
  • Operating Principle: NDIR
  • Response time: 120sec
  • Warm up time: 60sec
• Carbon Monoxide (CO)
  • Range: 0 ~ 1,000ppm
  • Resolution: 0.1 ppm
  • Operating Principle: Electrochemistry
  • Response time: 60sec
  • Warm up time: 60sec
• Dust (PM_2.5)
  • Range: 1 to 1000μg/m³
  • Resolution: 1 μg/m³
  • Operating Principle: Optics
  • Response time: 10sec
  • Warm up time: 300sec
• Dust (PM₁₀)
  • Range: 1 to 1000μg/m³
  • Resolution: 1 μg/m³
  • Operating Principle: Optics
  • Response time: 10sec
  • Warm up time: 300sec
• Airbone Chemicals (TVOCs)
  • Range: 0.13 ~ 2.5 ppm
  • Resolution: 0.01 ppm
  • Operating Principle: MEMS
  • Response time: 10sec
  • Warmup time: 300sec
• Formaldehyde (HCHO)
  • Range: 0.01 ~ 5ppm
  • Resolution: 0.01 ppm
  • Operating Principle: Electrochemistry
  • Response time: 30sec
  • Warm up time: 300sec
• Ozone (O₃)
  • Range: 0 ~ 5ppm
  • Resolution: 0.01 ppm
  • Operating Principle: Electrochemistry
  • Response time: 60sec
  • Warm up time: 600sec

* You have the choice to select the parameters you wanted to monitor. The basic model air quality detector come with Temperature, Humidity and CO2)

General Specifications:

• Sampling method: real time
• Display: 7 inches colour TFT with touch panel
• Data interfaces:
  • RS485(Modbus-RTU) (option)
  • WiFi(Modbus-TCP & JSON) (option)
  • BLE4.0 (option)
  • 2 sets of Dry Contact
• Operating Temperature: -10°C to 50°C (14°F to 122°F)
• Operating Humidity: < 95%RH, non-condensing
• Power: 5V DC, 2.0A
• Size: 233mm(L) x 159mm(W) x 46mm(H)