NAVIS
Wired Wind Speed Sensor
( Model No. WSS 100/4-20 mA )
Made in Slovenia
Wired wind speed anemometer consist from wind speed sensor with a pair of wiring cables, 4-20mA output signal.
Features:
- low starting speed
- wind tunnel tested
- field replaceable bearing
- replaceable anemometer cups
- linear output curve - linearization of cups rotation and starting threshold compensation
Technical Data:
- Wind speed measurement range: 0.7 m/s - 50.0 m/s
- Starting threshold: 0.6 m/s
- Operating voltage: 9...30 V DC
- Singal output: 4...20mA, 2 wire
- 4 mA = 0 m/s
- 20 mA - 50 m/s
- Output update: 4/sec
- Ourput average period: 1s
- Wind speed resolution: 0.1 m/s
- Wind speed accuracy: +/- 0.15m/s or 2.5% (up to 40 m/s)
- Loop resistance: max. 600 ohm / 24V
- Reverse polarity protection: Yes
- Transient voltage protection: Yes
- Temperature operating range: -30°C…+55°C
- Relative humidity: 0 - 100%
- Rotation sensor type: hall effect sensor
- Cable: Liyy 2 x 0.34 mm2; 10 m standard
- Bearings(replaceable): 2 x precision stainless steel ball bearing
- Material:
- Housing: anodized aluminum
- Cups (replaceable): PA (Polyamide)
- Weight: 120 g, without cable
- Mounting: the sensor mounts on a pipe with ø 20 mm diameter
Options (Additional Cost):
- Indiviidualy wind tunnel tested sensors with calibration certiifcate
- Measnet calibration certificate
- Various cable length
Caution Note: The Navis's products we sell in our online store are only CE certified, but not FCC certified. Therefore, it is illegally to sell in North American market (United States and Canada). Please purchase directly from North American distributor.
NAVIS
Wired Wind Speed Sensor
( Model No. WSS 100/4-20 mA )
Made in Slovenia
Wired wind speed anemometer consist from wind speed sensor with a pair of wiring cables, 4-20mA output signal.
Features:
- low starting speed
- wind tunnel tested
- field replaceable bearing
- replaceable anemometer cups
- linear output curve - linearization of cups rotation and starting threshold compensation
Technical Data:
- Wind speed measurement range: 0.7 m/s - 50.0 m/s
- Starting threshold: 0.6 m/s
- Operating voltage: 9...30 V DC
- Singal output: 4...20mA, 2 wire
- 4 mA = 0 m/s
- 20 mA - 50 m/s
- Output update: 4/sec
- Ourput average period: 1s
- Wind speed resolution: 0.1 m/s
- Wind speed accuracy: +/- 0.15m/s or 2.5% (up to 40 m/s)
- Loop resistance: max. 600 ohm / 24V
- Reverse polarity protection: Yes
- Transient voltage protection: Yes
- Temperature operating range: -30°C…+55°C
- Relative humidity: 0 - 100%
- Rotation sensor type: hall effect sensor
- Cable: Liyy 2 x 0.34 mm2; 10 m standard
- Bearings(replaceable): 2 x precision stainless steel ball bearing
- Material:
- Housing: anodized aluminum
- Cups (replaceable): PA (Polyamide)
- Weight: 120 g, without cable
- Mounting: the sensor mounts on a pipe with ø 20 mm diameter
Options (Additional Cost):
- Indiviidualy wind tunnel tested sensors with calibration certiifcate
- Measnet calibration certificate
- Various cable length
Caution Note: The Navis's products we sell in our online store are only CE certified, but not FCC certified. Therefore, it is illegally to sell in North American market (United States and Canada). Please purchase directly from North American distributor.
