NAVIS
Wireless Anemometer with Direction, Alarm
For Construction Sites and Industry
extended range 1300m and WIFI output
( Model No. W410XW/WSD)
Made in Slovenia
Features:
- extremely easy mounting due to wireless sensor
- up to 1300 m range with extended range sensor
- built-in audible alarm and red/yellow alarm lights
- 4 programmable alarm relay outputs with ON and OFF delays
- 2-zone wind direction alarm
- backlighted graphic LCD with large numbers
- Wi-Fi output for sending data to Navis LIVEDATA web interface
Functions:
- current wind speed
- wind direction
- bar graph for current wind speed
- bar graph for peak wind speed
- 8 h wind speed history graph
- 8 h alarm history graph
- temperature
Applications:
- crane applications
- mobile cranes
- tower cranes
- bridge cranes
- lift applications
- all applications where wind speed alarm is needed
- remote wind monitoring and logging
Technical Data:
- Measurement range: 0.6 - 50.0 m/s
- Wind direction measurement range: 0°~359° (6° graph resolution)
- Temperature measurement range: -30 ...+60 °C
- Unit of measurement: m/s, km/h, knots, mph
- Temperature units: °C, °F
- Wind speed averaging period: selectable 2 s, 10 s, 30 s
- Wind speed resolution: 0.1 m/s
- Wind direction resolution: 6°
- Temperature resolution: 1°C
- Wind speed accuracy: +/- 2,5 %, calibration possible in 0.5% steps
- Wind direction accuracy: +/- 2,5°, adjustable offset +/- 180°
- Temperature accuracy: +/- 1°C
- Communication frequency: 868 MHz
- Antenna input: 50 Ohm, SMA connector
- Transmission distance: extended range sensor, up to 1300 m visible distance
- Wi-Fi data transmission rate: every 2 seconds
- Wi-Fi transmission frequency: 2.4 GHz
- Wi-Fi range: Up to 20 meters. It can varies with type of Wi-Fi router.
- Navis LIVEDATA web interface URL: http://www.navis-livedata.com
- Operating voltage: 12 - 24 V DC
- Power consumption: 500mA
- Temperature operating range: -30 ... +60 °C
- Relay outputs:
- 4 x relay, contact rating 2A/24V
- Programmable ON and OFF delays
- Analog signal outputs:
- 2 x 4...20 mA (not isolated, common ground with supply)
- 4 mA = 0 m/s; 20 mA = programmable 10 - 50 m/s
- Alarms:
- adjustable max. alarm red light + continuous sound signal
- adjustable pre. alarm yellow light + interupted sound signal
- Sound signal (integrated buzzer): 85 dB/10 cm
- Dimensions - Receiver: 150 x 80 x 55 mm
- Weight - Receiver: 260g
- WSD Sensor model: WSD 011-1 (extended range 1300m)
- Battery - WSD sensor: 3,6 V AA Lithium battery, enclosed
- Sensor bearings: 2 x precision stainless steel Ball bearing
- Material: -
- sensor housing: AL/PVC
- cups (replaceable): PA (NYLON)
- vane (replaceable): Carbon/Al
- casing receiver: ABS
- Dimensions - sensor: Height 240 mm, overall vane diameter 220 mm
- Weight - WSD sensor: 260 g
- Mounting: sensor mounts on a pipe with ø20 mm diameter
Access to Navis LIVEDATA web interface:
Navis LiveData is cloud based web portal that allows viewing data form muliple Navis wireless wind sensors. It works by connecing Navis wireless wind sensors to Navis LiveData capable devices. Devices transmit data to Navis LiveData web interface. Data can be viewed globally on web browser using URL: http://navis-livedata.com.
Features:
- view data online 24/7 via navis-livedata.com
- real time wind speed, direction and temperature data
- wind speed in m/s, km/h, mph, kt
- temperature in °C in °F
- multiple data charts for wind speed, direction and temperature
- chart history up to 31 days
- logs can be downloaded for up to 31 days for detailed analysis
- log sample interval can be adjusted from 2 seconds
- local Navis display units
- free Basic or payable Advanced access available
*When new LiveData account is registered, 1 month free Advanced access trial is automatically enabled.
- LiveData Basic - FREE Bascic Access
- Sensors: One per device
- Live: 1 min data refresh
- Charts: Day, 24h graphs
- Log: not support
- LiveData Advanced - Payable Advanced Access
- Sensors: Up to three per device
- Live: real time refresh (about 2 seconds refreshing)
- Charts: 10 minute, hour, day, week, month
- Log: Yes (The log data file format in .txt)
Accessories:
- WSD Sensor self levelling mounting assembly (Optional)
- Wind tunnel certificated version available (Optional)
Caution Note: The Navis's products we sell in our online store are only CE certified, but not FCC certified. Therefore, it is illegally to sell in North American market (United States and Canada). Please purchase directly from North American distributor.
NAVIS
Wireless Anemometer with Direction, Alarm
For Construction Sites and Industry
extended range 1300m and WIFI output
( Model No. W410XW/WSD)
Made in Slovenia
Features:
- extremely easy mounting due to wireless sensor
- up to 1300 m range with extended range sensor
- built-in audible alarm and red/yellow alarm lights
- 4 programmable alarm relay outputs with ON and OFF delays
- 2-zone wind direction alarm
- backlighted graphic LCD with large numbers
- Wi-Fi output for sending data to Navis LIVEDATA web interface
Functions:
- current wind speed
- wind direction
- bar graph for current wind speed
- bar graph for peak wind speed
- 8 h wind speed history graph
- 8 h alarm history graph
- temperature
Applications:
- crane applications
- mobile cranes
- tower cranes
- bridge cranes
- lift applications
- all applications where wind speed alarm is needed
- remote wind monitoring and logging
Technical Data:
- Measurement range: 0.6 - 50.0 m/s
- Wind direction measurement range: 0°~359° (6° graph resolution)
- Temperature measurement range: -30 ...+60 °C
- Unit of measurement: m/s, km/h, knots, mph
- Temperature units: °C, °F
- Wind speed averaging period: selectable 2 s, 10 s, 30 s
- Wind speed resolution: 0.1 m/s
- Wind direction resolution: 6°
- Temperature resolution: 1°C
- Wind speed accuracy: +/- 2,5 %, calibration possible in 0.5% steps
- Wind direction accuracy: +/- 2,5°, adjustable offset +/- 180°
- Temperature accuracy: +/- 1°C
- Communication frequency: 868 MHz
- Antenna input: 50 Ohm, SMA connector
- Transmission distance: extended range sensor, up to 1300 m visible distance
- Wi-Fi data transmission rate: every 2 seconds
- Wi-Fi transmission frequency: 2.4 GHz
- Wi-Fi range: Up to 20 meters. It can varies with type of Wi-Fi router.
- Navis LIVEDATA web interface URL: http://www.navis-livedata.com
- Operating voltage: 12 - 24 V DC
- Power consumption: 500mA
- Temperature operating range: -30 ... +60 °C
- Relay outputs:
- 4 x relay, contact rating 2A/24V
- Programmable ON and OFF delays
- Analog signal outputs:
- 2 x 4...20 mA (not isolated, common ground with supply)
- 4 mA = 0 m/s; 20 mA = programmable 10 - 50 m/s
- Alarms:
- adjustable max. alarm red light + continuous sound signal
- adjustable pre. alarm yellow light + interupted sound signal
- Sound signal (integrated buzzer): 85 dB/10 cm
- Dimensions - Receiver: 150 x 80 x 55 mm
- Weight - Receiver: 260g
- WSD Sensor model: WSD 011-1 (extended range 1300m)
- Battery - WSD sensor: 3,6 V AA Lithium battery, enclosed
- Sensor bearings: 2 x precision stainless steel Ball bearing
- Material: -
- sensor housing: AL/PVC
- cups (replaceable): PA (NYLON)
- vane (replaceable): Carbon/Al
- casing receiver: ABS
- Dimensions - sensor: Height 240 mm, overall vane diameter 220 mm
- Weight - WSD sensor: 260 g
- Mounting: sensor mounts on a pipe with ø20 mm diameter
Access to Navis LIVEDATA web interface:
Navis LiveData is cloud based web portal that allows viewing data form muliple Navis wireless wind sensors. It works by connecing Navis wireless wind sensors to Navis LiveData capable devices. Devices transmit data to Navis LiveData web interface. Data can be viewed globally on web browser using URL: http://navis-livedata.com.
Features:
- view data online 24/7 via navis-livedata.com
- real time wind speed, direction and temperature data
- wind speed in m/s, km/h, mph, kt
- temperature in °C in °F
- multiple data charts for wind speed, direction and temperature
- chart history up to 31 days
- logs can be downloaded for up to 31 days for detailed analysis
- log sample interval can be adjusted from 2 seconds
- local Navis display units
- free Basic or payable Advanced access available
*When new LiveData account is registered, 1 month free Advanced access trial is automatically enabled.
- LiveData Basic - FREE Bascic Access
- Sensors: One per device
- Live: 1 min data refresh
- Charts: Day, 24h graphs
- Log: not support
- LiveData Advanced - Payable Advanced Access
- Sensors: Up to three per device
- Live: real time refresh (about 2 seconds refreshing)
- Charts: 10 minute, hour, day, week, month
- Log: Yes (The log data file format in .txt)
Accessories:
- WSD Sensor self levelling mounting assembly (Optional)
- Wind tunnel certificated version available (Optional)
Caution Note: The Navis's products we sell in our online store are only CE certified, but not FCC certified. Therefore, it is illegally to sell in North American market (United States and Canada). Please purchase directly from North American distributor.