Carbon Dioxide Monitor / Controller
(Model No.: F2000IAQ-CO2-3103U)
The monitor/controller is special design to monitorand alarm CO2 level, also provides one on/off relay output to control a fan or a CO2 generator. An data logger is designed inside, which can record CO2 measurements more than 115 days and can be saved the data via a USB disk. The memorial CO2 monitor / controller not only very easily to be used as a CO2 monitor and controller, but also as a recorder of the measurements.
Application in schools, kindergartens, officebuildings, greenhouses and so on.
Product Features
- Real-time monitoring carbon dioxide (CO2) measurements during 0ppm to 20,000ppm range
- Optional real-timemonitoring temperature from -20℃to 60℃and relative humidity from 0 to 100%RH
- Non-dispersive infrared (NDIR) CO2 sensor with self calibration, 15 years lifetime
- The 3-LED indicator lights indicate three CO2measured ranges
- LED lights brightness adjustable
- Easy preset CO2 level for buzzer alert (optional)
- Provide 1X On/Off dry contact output to control alternative a ventilator and a CO2 generator
- An internal data logger is used to record CO2 measurements as well as optional temperature and RH% measurements.
- With super large capability memorizer, it cansave data of up to 115 days
- Provide the software to preset the sampling time, read and record CO2, temperature & RH levels on PC
- Post the data from the internal memorizer by any USB disk, and copy the data to a PC
Specification:
- Gas detected: Carbon Doxide (CO2)
- Sensing element: Non-Depressive Infrared Detector (NDIR)
- CO2 NDIR life: >10 years
- CO2 range: 0~5000ppm ; 0~20,000ppm or 0~50,000ppm (optional)
- Accuracy@25℃(77℉):
- ±40ppm + 3% of reading(0~5,000ppm)
- ±75ppm or10% of readingwhichever is greater (0~20,000ppm or 0~50,000ppm)
- Stability: <2% of FS over life of sensor (15 yr typocal)
- Calibration internal: ABC Logic Self Calibration Algorithm
- CO2 setting & Display resolution: 1ppm
- Pressure Dependence: Can be preset the altitude by the end users to eliminate the pressre influence via a inside software
- Temperature & RH sensor (Optional): Combined digital temperature and relative humidity sensor
- Temperature range: 0℃~60℃(32℉~140℉)
- Humidity range: 0~100%RH
- Temperature & RH accuracy: ±0.5℃/ ±3%RH
- Option: 1X dry contact output: Rated currency for contact point: 2A 220VAC/30VDC, resistance load
- Operation condition: 0℃~60℃, 0~95%RH(non-condensing)
- Power supply:
- 24VAC/VDC ±10%wiring connection
- Or with a power adaptor of 24V/230V or 24V/110V
- Consumption: 3.5W/Max, 2.5W/Average
- Weight: 380g
- Dimension: 130mm x 90mm x 40mm
- Connections interface: Locate in interface of connection
- Installment standard: 65mm x 65mm or 2" x 4" wire box
- Wiring standard: wire section area <1.5mm2
- Approved Standard: CE-Approvel
- Presetting and operation: Buttons and internal DIP switches
- Sampling alternation: Preset the sampling alternation during 60s to 1h. The general maximum day of the data record is 115 days
- Software Features:
- Outputs date is in .txt format
- USBDataGather software is for stand-alone application. It’s used to set parameters for different applications, to display the graph of capture data, to calculate the average value of a period, as well as the max. and min. value
Accessories
- Cardon Dioxide Monitor/Controller
- User Manual
Carbon Dioxide Monitor / Controller
(Model No.: F2000IAQ-CO2-3103U)
The monitor/controller is special design to monitorand alarm CO2 level, also provides one on/off relay output to control a fan or a CO2 generator. An data logger is designed inside, which can record CO2 measurements more than 115 days and can be saved the data via a USB disk. The memorial CO2 monitor / controller not only very easily to be used as a CO2 monitor and controller, but also as a recorder of the measurements.
Application in schools, kindergartens, officebuildings, greenhouses and so on.
Product Features
- Real-time monitoring carbon dioxide (CO2) measurements during 0ppm to 20,000ppm range
- Optional real-timemonitoring temperature from -20℃to 60℃and relative humidity from 0 to 100%RH
- Non-dispersive infrared (NDIR) CO2 sensor with self calibration, 15 years lifetime
- The 3-LED indicator lights indicate three CO2measured ranges
- LED lights brightness adjustable
- Easy preset CO2 level for buzzer alert (optional)
- Provide 1X On/Off dry contact output to control alternative a ventilator and a CO2 generator
- An internal data logger is used to record CO2 measurements as well as optional temperature and RH% measurements.
- With super large capability memorizer, it cansave data of up to 115 days
- Provide the software to preset the sampling time, read and record CO2, temperature & RH levels on PC
- Post the data from the internal memorizer by any USB disk, and copy the data to a PC
Specification:
- Gas detected: Carbon Doxide (CO2)
- Sensing element: Non-Depressive Infrared Detector (NDIR)
- CO2 NDIR life: >10 years
- CO2 range: 0~5000ppm ; 0~20,000ppm or 0~50,000ppm (optional)
- Accuracy@25℃(77℉):
- ±40ppm + 3% of reading(0~5,000ppm)
- ±75ppm or10% of readingwhichever is greater (0~20,000ppm or 0~50,000ppm)
- Stability: <2% of FS over life of sensor (15 yr typocal)
- Calibration internal: ABC Logic Self Calibration Algorithm
- CO2 setting & Display resolution: 1ppm
- Pressure Dependence: Can be preset the altitude by the end users to eliminate the pressre influence via a inside software
- Temperature & RH sensor (Optional): Combined digital temperature and relative humidity sensor
- Temperature range: 0℃~60℃(32℉~140℉)
- Humidity range: 0~100%RH
- Temperature & RH accuracy: ±0.5℃/ ±3%RH
- Option: 1X dry contact output: Rated currency for contact point: 2A 220VAC/30VDC, resistance load
- Operation condition: 0℃~60℃, 0~95%RH(non-condensing)
- Power supply:
- 24VAC/VDC ±10%wiring connection
- Or with a power adaptor of 24V/230V or 24V/110V
- Consumption: 3.5W/Max, 2.5W/Average
- Weight: 380g
- Dimension: 130mm x 90mm x 40mm
- Connections interface: Locate in interface of connection
- Installment standard: 65mm x 65mm or 2" x 4" wire box
- Wiring standard: wire section area <1.5mm2
- Approved Standard: CE-Approvel
- Presetting and operation: Buttons and internal DIP switches
- Sampling alternation: Preset the sampling alternation during 60s to 1h. The general maximum day of the data record is 115 days
- Software Features:
- Outputs date is in .txt format
- USBDataGather software is for stand-alone application. It’s used to set parameters for different applications, to display the graph of capture data, to calculate the average value of a period, as well as the max. and min. value
Accessories
- Cardon Dioxide Monitor/Controller
- User Manual